Dil SeçenekleriTürkçeIngilizce
PO LY GIM
OUR BRANDS

PO LY GIM

DIAMOND 20 CSB II/III Series

DIAMOND 20 CSB II/III Series

Machine Features:

Cross travel sub-spindle :

Cross travel sub-spindle design. The main and sub spindles can work either one at a time or simultaneously for reduced machining duration. This design brings multi-function front and rear machining.

Short remnant material :

With the optional rough material bushing, the remnant material can be 50mm (depending on the part length).

Raw material machining :

0.1mm material tolerance can be achieved by using the Rough material bushing.

Replaceable fixed / Driven toolholder set :

The 4 pc back stationary / driven tool holder is replaced by the newly designed replaceable fixed tool holder or driven tool holder. This enables increased tooling fiexibility.



Examples:

6 pcs Cross Working Driven Tool Holder
4 pcs I.D. Stationary Tool Holder
3 pcs Front Working Driven Tool Holder
3 pcs Back Working Driven tool Holder
4 pcs Back I.D. Stationary Tool Holder
4 pcs Back I.D. Stationary / Working Driven Tool Holder
6 pcs O.D. Turning Tool Holder (42 Type with5 pcs O.D.Turning Tool)

Main spindle can option CS axis

Using Live Bushing with Guide Bush

Remnant Material 150 mm
Using Rough Material Bushing without Guide Bush

Remnant Material 50 mm



Standard Accessories:

  • Main spindle
  • Back spindle
  • Work light
  • Coolant system
  • Part off detective sensor
  • Fixed bushing (Except 32B Ⅱ/ 32CSB Ⅱ/ 42B Ⅱ/ 42 CSB Ⅱ)
  • Live bushing
  • Part catcher
  • 6 pcs cross working driven tool holder
  • 4 pcs I.D. stationary tool holder
  • 3 pcs front working driven tool holder
  • 3 pcs back working driven tool holder
  • 4 pcs back I.D. stationary tool holder
  • 4 pcs back I.D. stationary / working driven tool holder
  • 6 pcs O.D. turning tool holder(42 Type with5 pcs O.D. turning tool)

Optional Accessories:

  • CS axis
    (CSBⅡMain,back spindle 0.001° orientation)
    (CSBⅢMain spindle 0.001° orientation)
  • Rough material bushing
    (Max. machining = bar diameter x 3)
  • Chip conveyor + bucket
  • 2 pcs front I.D. stationary tool holder
    (Only available for B Ⅲ / CSB Ⅲ with belt type)

Video:

CSB III-S (CSB III Whirling)


CSB III Standard


Diamond 32 CSB II


Machine Specifications:

ItemsDIAMOND
20B Ⅱ
DIAMOND
20CSB Ⅱ
DIAMOND
32B Ⅱ
DIAMOND
32CSB Ⅱ
DIAMOND
42B Ⅱ
DIAMOND
42CSB Ⅱ
Working RangeMax. Machining Dia.Ø20 mmØ20 mmØ32 mmØ32 mmØ42 mmØ42 mm
Max. Machining Length Per Chucking250 mm250 mm250 mm250 mm250 mm250 mm
Max. Drilling Dia. (Main / Sub Spindle)Ø12 mmØ12 mmØ15 mmØ15 mmØ15 mmØ15 mm
Max.Tapping Dia. (Main / Sub Spindle)M10M10M12M12M12M12
O.D.ToolingNumber of Tools666655
Dimension□12 × 12 × 120□12 × 12 ×120□16 × 16 ×120□16 × 16 × 120□16 × 16 × 120□16 × 16 × 120
I.D. ToolingNumber of Tools444444
Dimension10 mm (ER16)10 mm (ER16)13 mm (ER20)13 mm (ER20)13 mm (ER20)13 mm (ER20)
Cross Working Driven ToolingNumber of Tools-6-6-6
Dimension-10 mm (ER16)-13 mm (ER20)-13 mm (ER20)
Speed-200-6000 r.p.m.-200-6000 r.p.m.-200-6000 r.p.m.
Front Working Driven ToolingNumber of Tools-3-3-3
Dimension-10 mm (ER16)-13 mm (ER20)-13 mm (ER20)
Speed-200-6000 r.p.m.-200-6000 r.p.m.-200-6000 r.p.m.
Back I.D. ToolingNumber of Tools4+44+44+44+44+44+4
Dimension10 mm (ER16)10 mm (ER16)13 mm (ER20)13 mm (ER20)13 mm (ER20)13 mm (ER20)
Back Working Driven ToolingNumber of Tools-3-3-3
Dimension-7 mm (ER11)-10 mm (ER16)-10 mm (ER16)
Number of Tools-4-4-4
Dimension-10 mm (ER16)-13 mm (ER20)-13 mm (ER20)
Speed-3000 r.p.m.-3000 r.p.m.-3000 r.p.m.
SpindleSpindle Hole Dia.Ø22 mmØ22 mmØ35 mmØ35 mmØ45 mmØ45 mm
Spindle Speed200- 8000 r.p.m.200- 8000 r.p.m.200- 7000 r.p.m.200- 7000 r.p.m.200- 5000 r.p.m.200- 5000 r.p.m.
Main Spindle Indexing AngleC axisC axisC axisC axisC axisC axis
Back SpindleSpindle Hole Dia.Ø22 mmØ22 mmØ35 mmØ35 mmØ45 mmØ45 mm
Spindle Speed200-8000 r.p.m.200-8000 r.p.m.200-7000 r.p.m.200-7000 r.p.m.200-5000 r.p.m.200-5000 r.p.m.
Max. Length for Front Ejection60 mm60 mm60 mm60 mm80 mm80 mm
Sub Spindle Indexing AngleC axisC axisC axisC axisC axisC axis
Rapid TraverseX1, Y1, Z1, X2, Z230 m/min30 m/min30 m/min30 m/min30 m/min30 m/min
MotorsSpindle Motor3.7 kw3.7 kw5.5 kw5.5 kw7.5 kw7.5 kw
Back Spindle Motor3.7 kw3.7 kw5.5 kw5.5 kw5.5 kw5.5 kw
X1, Y1, Z1, X2, Z2 Axis Motor0.5 kw0.5 kw0.5 kw0.5 kw0.5 kw0.5 kw
Coolant Pump Motor1 HPx21 HPx21 HPx21 HPx21 HPx21 HPx2
Lubrication Motor4 w x24 w x24 w x24 w x24 w x24 w x2
Driven Tools Motor-fixed Arm-1.5 kw-1.5 kw-1.5 kw
Driven Tools Motor-back Replaced Toolholder Set-0.4 kw-0.4 kw-0.4 kw
Machine DimensionsCenter Height1050 mm1050 mm1050 mm1050 mm1050 mm1050 mm
Weight3100 kg3130 kg3350 kg3380 kg3670 kg3700 kg
Machine Dimension2500 × 1280 × 17802500 × 1280 × 17802500 × 1280 × 17802500 × 1280 × 17802500 × 1280 × 17802500 × 1280 × 1780
Air PressureAir Pressure5 kg/cm5 kg/cm5 kg/cm5 kg/cm5 kg/cm5 kg/cm
Air Supply10 L/min10 L/min10 L/min10 L/min10 L/min10 L/min
ItemsDIAMOND
12B Ⅲ
DIAMOND
12CSB Ⅲ
DIAMOND
16B Ⅲ
DIAMOND
16CSB Ⅲ
DIAMOND
20B Ⅲ
DIAMOND
20CSB Ⅲ
DIAMOND
25B Ⅲ
DIAMOND
25CSB Ⅲ
Working RangeMax. Machining Dia.Ø12.7 mmØ12.7 mmØ16.5 mmØ16.5 mmØ20 mmØ20 mmØ26 mmØ26 mm
Max. Machining Length Per Chucking200 mm200 mm200 mm200 mm200 mm200 mm200 mm200 mm
Max. Drilling Dia.
(Main Spindle)
Ø7 mmØ7mmØ10 mmØ10 mmØ10 mmØ10 mmØ10 mmØ10 mm
Max. Drilling Dia.
(Sub Spindle)
Ø7mmØ7mmØ7 mmØ7 mmØ7 mmØ7 mmØ7 mmØ7 mm
Max. Tapping Dia.
(Main Spindle)
M6M6M8M8M8M8M8M8
Max.Tapping Dia.
(Sub Spindle)
M6M6M6M6M6M6M6
O.D.ToolingNumber of Tools66666666
Dimension□12 × 12 × 120□12 × 12
× 120
□12 × 12 ×120□12 × 12
× 120
□12 × 12 × 120□12 × 12
× 120
□12 × 12 × 120□12 × 12
× 120
I.D. ToolingNumber of Tools44444444
Dimension10 mm (ER16)10 mm
(ER16)
10 mm (ER16)10 mm
(ER16)
10 mm (ER16)10 mm
(ER16)
10 mm (ER16)10 mm
(ER16)
Cross Working Driven ToolingNumber of Tools-6-6-6-6
Dimension-10 mm (ER16)-10 mm (ER16)-10 mm (ER16)-10 mm (ER16)
Speed-200-6000 r.p.m.-200-6000 r.p.m.-200-6000 r.p.m.-200-6000 r.p.m.
Front Working Driven ToolingNumber of Tools-3-3-3-3
Dimension-10 mm (ER16)-10 mm (ER16)-10 mm (ER16)-10 mm (ER16)
Speed-200-6000 r.p.m.-200-6000 r.p.m.-200-6000 r.p.m.-200-6000 r.p.m.
Back I.D. ToolingNumber of Tools4+44+44+44+44+44+44+44+4
Dimension10 mm (ER16)10 mm
(ER16)
10 mm (ER16)10 mm
(ER16)
10 mm (ER16)10 mm
(ER16)
10 mm (ER16)10 mm
(ER16)
Back Working Driven ToolingNumber of Tools-3-3-3-3
Dimension-7 mm (ER11)-7 mm (ER11)-7 mm (ER11)-7 mm (ER11)
Number of Tools-4-4-4-4
Dimension-10 mm (ER16)-10 mm (ER16)-10 mm (ER16)-10 mm (ER16)
Speed-200~6000 r.p.m.-200~6000 r.p.m.-200~6000 r.p.m.-200~6000 r.p.m.
SpindleSpindle Hole Dia.Ø13 mmØ13 mmØ17 mmØ17 mmØ22 mmØ22 mmØ30 mmØ30 mm
Spindle Speed200- 8000 r.p.m.200- 8000
r.p.m.
200- 8000 r.p.m.200- 8000
r.p.m.
200- 8000 r.p.m.200- 8000
r.p.m.
200- 8000 r.p.m.200- 8000
r.p.m.
Main Spindle Indexing AngleC axisC axis
(Optional CS axis 0.001º indexing)
C axisC axis
(Optional CS axis 0.001º indexing)
C axisC axis
(Optional CS axis 0.001º indexing)
C axisC axis
(Optional CS axis 0.001º indexing)
Back SpindleSpindle Hole Dia.Ø13 mmØ13 mmØ17 mmØ17 mmØ22 mmØ22 mmØ30 mmØ30 mm
Spindle Speed200-5000 r.p.m
(200-8000 r.p.m Option built-in motor)
Max. Length for Front Ejection50 mm50 mm50 mm50 mm50 mm50 mm50 mm50 mm
Sub Spindle Indexing AngleC axisC axis
(Optional CS axis 0.001º indexing)
C axisC axis
(Optional CS axis 0.001º indexing)
C axisC axis
(Optional CS axis 0.001º indexing)
C axisC axis
(Optional CS axis 0.001º indexing)
Rapid TraverseX224 m/min24 m/min24 m/min24 m/min24 m/min24 m/min24 m/min24 m/min
X1, Y1, Z1, Z230 m/min30 m/min30 m/min30 m/min30 m/min30 m/min30 m/min30 m/min
MotorsSpindle Motor2.2 kw2.2 kw2.2 kw2.2 kw3.7 kw3.7 kw3.7 kw3.7 kw
Back Spindle Motor2.2 kw
(2.2 kw Option built-in motor)
2.2 kw
(3.7 kw Option built-in motor)
X1 Axis Motor1 kw1 kw1 kw1 kw1 kw1 kw1 kw1 kw
Y1, Z1, X2, Z2 Axis Motor0.75 kw0.75 kw0.75 kw0.75 kw0.75 kw0.75 kw0.75 kw0.75 kw
Coolant Pump Motor1 HP1 HP1 HP1 HP1 HP1 HP1 HP1 HP
Lubrication Motor4 w x24 w x24 w x24 w x24 w x24 w x24 w x24 w x2
Driven Tools Motor-fixed Arm-1.5 kw-1.5 kw-1.5 kw-1.5 kw
Driven Tools Motor-back Replaced Toolholder Set-0.4 kw-0.4 kw-0.4 kw-0.4 kw
Machine DimensionsCenter Height890 mm890 mm890 mm890 mm890 mm890 mm890 mm890 mm
Weight1850 kg1880 kKg2000 kg2030 kg2050 kg2080 kg2100 kg2130 kg
Machine Dimension2440 × 1430 × 16502440 ×
1430 ×
1650
2440 × 1430 × 16502440 ×
1430 ×
1650
2440 × 1430 × 16502440 ×
1430 ×
1650
2440 x
1430 x
1650
2440 x
1430 x
1650
Air PressureAir Pressure5 kg/cm5 kg/cm5 kg/cm5 kg/cm5 kg/cm5 kg/cm5 kg/cm5 kg/cm
Air Supply10 L/min10 L/min10 L/min10 L/min10 L/min10 L/min10 L/min10 L/min

* We reserve the rights to change the specs below without any prior notification.

 
#
Tamam