Dil SeçenekleriTürkçeIngilizce
JOHNFORD
OUR BRANDS

JOHNFORD

SL-60-2S/SL-60A-2S (SUB SPINDLE SERIES)

ITEM / MODELSL-60-2SSL-60A-2S
Sub-spindle
Swing over bed (mm)Ø580Ø580
Swing over cross slide (mm)Ø 450 / Ø 380 (Y-axis)Ø 450 / Ø 380 (Y-axis)
Chuck size (inch)1012
Bar capacity (mm)Ø 76.5Ø91/ Ø102 (Opt.)
Spindle noseA2-8A2-8 / A2-11(Opt.)
Spindle bore (mm)Ø 86Ø 115
Spindle transmissionOne step2 step Auto
Spindle speed (rpm)35003000 / 2800 (Opt.)
Spindle motor (kW)15 / 18.522 / 26
Spindle bearing diameter (mm)Ø 130Ø 160
Sub-spindle chuck size (inch)88
Sub-spindle bar capacity (mm)Ø51(Ø2")Ø51(Ø2")
Sub-spindle noseA2-6A2-6
Sub-spindle bore (mm)Ø 66(Ø2.6")Ø 66(Ø2.6")
Sub-spindle speed stepOne stepOne step
Sub-spindle speed (rpm)45004500
Sub-spindle motor (kW)11 / 1511 / 15
Sub-spindle bearing diameter (mm)Ø100(Ø3.9")Ø100(Ø3.9")
No. of tools1212
Cross travel (X-axis) (mm)250(9.8")250(9.8")
Y -axis travel (mm)± 40(1.6")± 40(1.6")
Longitudinal travel (Z 1 / Z 2 axis) (mm)900(35.4")900(35.4")
Rapid traverse (X1 / Y / Z 1 / Z 2) (m/min)15 / 10 / 18 / 1815 / 10 / 18 / 18
Servo motor (X-axis) (kW)3 / 4 (for-Y-axis)3 / 4 (for-Y-axis)
Servo motor (Y-axis) ( kW)1.61.6
Servo motor (Z 1 / Z 2-axis) (kW)4.04.0
Power turret motor (Y-axis) (kW)3.7 / 5.53.7 / 5.5
Bed Inclination /
Saddle Inclination (*)
45°45°
Weight (kg)7800(17160 lb)7800(17160 lb)
Machine Dimensions(mm) - W × H2100×2120(82.7"x83.5")2100×2120(82.7"x83.5")
Machine Dimensions(mm) - L5210(205.1")5540(218.1")

※ All data subject to change without notice.
※ All the specifications are listed with the FANUC CNC system.

STANDARD ACCESSORIES

  • Coolant system
  • Splash guard
  • Through hole 3-jaw chuck
  • Programmable hydwaulic tailstock (for SL-35/50/65/70/80/100/120)
  • Hydraulic tailstock quill (for SL-20/30/40/40L)
  • Chain type chip conveyor
  • Tool box and various manuals
  • Tool holders (direct mounting type)
  • Auto lubrication with alarm
  • LED Working lamp
  • Type of guide ways: box ways
  • FANUC 0iTD controller

OPTIONAL ACCESSORIES

  • C-axis (C . S axis with angle encoder but no gearbox / C.F axis with gearbox)
  • C+Y-axis
  • Contact tool setting system (Renishaw TS-20 or BLUM NT-A2 / NT-A3 )
  • Parts catcher
  • Tool holders (VDI type)
  • Programmable hydraulic tailstock (for SL-20/30/40/40L)
  • Bar feeder interface (or bar feeder)
  • 2 step auto gearbox (for SL-20/30/35/40/40L)
  • Rotary tailstock
  • Angle encoder for C-axis
 
#
Tamam