Dil SeçenekleriTürkçeIngilizce
JOHNFORD

VTC-2000ATC/2500ATC/ 3000ATC/4000ATC/5000ATC/ 6000ATC

ITEM MODELVTC-2000ATCVTC-2500ATCVTC-3000ATC
Max. swing diameter (mm)Ø2500 (98.4")Ø3000 (118.1")Ø4000 (157.5")
Max. turning diameter (mm)Ø2500 (98.4")Ø3000 (118.1")Ø4000 (157.5")
Max. turning height (mm)1600 (63")1600 (63") Std. ;
2200 (86.6") / 2800 (110.2") Opt.
Work table size (mm)Ø2000 (78.7")Ø2500 (98.4")Ø3000 (118.1")
Max. table load (kg)10000 (22000 lb)15000 (33000 lb)15000 (33000 lb)
Cross travel (X axis) (mm)1685 (66.3")1935 (76.2")2435 (95.87")
Vertical travel of ram (Z axis) (mm)1000 (39.3")1000 (39.4”)
Vertical travel of cross rail (W axis) (mm)1000 (39.3")1000 (39.4”)
Speed of table (rpm)2-1302-75
Speed steps2 step Auto2 step Auto
Max. spindle torque (Nm)4254947275
Power spindle speed (Opt.) (rpm)2-24002400
Rapid traverse (X / Z axis) (m / min)12 / 1012 / 10
No. of toolsATC type: 12 (Std.) ; 16, 24, 40, 60 (Opt.)ATC type: 12 (Std.)
Type of tool shank7 / 24 taper BT-50
Max. tool size for automatic tool changing (mm)300W x 155T x 500L355W x 155T x 500L
Max. tool weight (kg)50 (110 lb)50 (110 lb)
Max. loading of ATC (kg)350 (770 lb)350 (770 lb)
Tool change time (ATC) (sec)3030
Square tool holder
(Boring tool size) (mm)
□32 x □32 (Ø60)□32 x □32 (Ø60)
Square section of RAM (mm)300 x 300 (12" x 12")300 x 300 (12" x 12")
*Spindle motor / Table spindle motor (kW)45 / 55 (60 / 75 Opt.)(60 / 75)
Power spindle motor (Opt.) (kW)11 /15 (15 /18.5 Opt.)11 /15 (15 /18.5 Opt.)
Servo motor (X / Z axis) (kW)7.0 / 7.07.0 / 7.0
CF axis motor (Opt.) (kW)4
Coolant pump motor (kW)0.98Chip flushing coolant 1.3kW
TPHK 4T 3-3S (3 bar)
Coolant thru tool tip 2.0kW
TPRK 2T6-5S (5 bar)
Vertical of cross rail motor (kW)7.57.5
Hydraulic motor (kW)3.83.8
Machine weight (kg)72000 (158400 lb)75000 (165000 lb)85000 (187000 lb)
Dimensions (L x W x H) (mm)8500 x 7570 x 6860
(334.6" x 298" x 270.1 ")
9200 x 7820 x 6860
(362.2" x 307.9 " x 270.1 ")
9700 x 8070 x 6900
(381.9" x 317.7 " x 271.7 ")

※ All data subject to change without notice.
※ All the specifications are listed with the FANUC CNC system.

STANDART AKSESUARLAR

  • Coolant system
  • Splash guard
  • Chip conveyor
  • Tool holders
  • Tool box and various manuals
  • ATC (except VTC-650)

OPSİYON AKSESUARLAR

  • Contact tool setting system (Renishaw TS-20 or BLUM NT-A2 / NT-A3)
  • Tool holders (VDI)
  • Automatic pallet changer (A.P.C)
  • Hydraulic chuck 3,4,5,6 jaws
  • High pressure coolant through spindle
  • C-axis
  • X/Z axis linear scale
  • Oil skimmer
 
#
Tamam